Key points are not available for this paper at this time.
Polymer electrolytes exhibit advantageous processing characteristics and superior mechanical properties, making them highly promising for all-solid-state lithium battery applications. However, their low room-temperature ionic conductivity remains a major obstacle to widespread commercialization. To address this challenge, we incorporated Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO) ceramics to facilitate the structural modification of polyvinylidene fluoride (PVDF) polymer electrolytes. Furthermore, we enhanced the electrolyte film fabrication process by replacing conventional solution casting with advanced 3D printing technology. This innovative approach not only improved the ionic conductivity (8.3 × 10 −4 S·cm −1 ) and mechanical strength (16 MPa) of the electrolyte film but also enabled complex geometries, streamlining production and potentially lowering costs. To evaluate the performance of the developed electrolyte, solid-state lithium batteries with the configuration LiCoO 2 |printed PVDF/LLZTO film|Li were constructed, exhibiting satisfactory rate capability and cycling stability at room temperature. Our results demonstrate that 3D-printed solid electrolytes represent a promising strategy for advancing solid-state battery technology. The data supporting this article have been included as part of the Supplementary Information . • Composite electrolyte with great printability, excellent ionic and super mechanical properties was obtained. • 3D printing technology was employed to fabricate the composite electrolyte with arbitrary shape and great performance. • The cells based on 3D-printed electrolytes exhibited good rate performance.
Tu et al. (Tue,) studied this question.