Answers are grounded in this paper and cite their sources.
A current-mode quadruple-Langmuir-probe method was developed and used to measure electron temperature, electron density, and the ratio of ion speed to most probable thermal speed in the plume of a rectangular-plate laboratory model Teflon ® pulsed plasma thruster. The current mode involves biasing all the electrodes and measuring the collected currents. The current collection theory and uncertainty analysis are presented. The thruster was operating at discharge energies of 5, 20, and 40 J and 15-microsecond pulses. Quadruple-probe measurements were taken at 10, 15, and 20 cm downstream of the Teflon propellant surface and angular locations of up to 40 deg off the centerline on planes perpendicular and parallel to the thruster electrodes. The electron temperature at 10 cm reaches values that range from 10 to 18 eV during the rise of the discharge current but remains below 5 eV for the rest of the pulse. The electron temperature shows no angular variation but reduces with increasing radial distance. The maximum electron density at 10 cm is 10, 20 7 × 10, 20 and 1.5 × 10 21 m −3 for the 5, 20, and 40-J discharge energy, respectively. The electron density reduces with increasing angle especially at larger downstream distances. The ion-speed ratios indicate supersonic ions and increase with downstream distance and for all angles considered. Ion speeds at 10 cm are approximately 30,000 m/s at the beginning of the pulse and reduce in magnitude to below 10,000 m/s near the end of the pulse.
No takes yet. Share an insight, caveat, or question.
Gatsonis et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: