Answers are grounded in this paper and cite their sources.
The most common type of extruded power cable insulation is based on cross-linked polyethylene (XLPE), which cannot be recycled as a thermoplastic material. Hence, thermoplastic insulation materials currently receive considerable attention because they would allow recycling through re-melting. In particular blends of polyethylene (PE) and polypropylene (PP) would be a compelling alternative to XLPE, provided that the poor compatibility of the two polymers can be overcome. Here, we establish an alternative approach that exploits the in situ formation of a PE–PP-type copolymer through reactive compounding. Ternary blends of an ethylene-glycidyl methacrylate copolymer, a maleic anhydride-grafted polypropylene, and up to 70 wt % low-density polyethylene (LDPE) are compounded at 170 °C. Covalent bonds form through reaction between epoxy and carboxyl groups, leading to a PE–PP-type copolymer that shows good compatibility with LDPE. The in situ generated PE–PP copolymer arrests creep above the melting temperature of LDPE, mediated by a continuous network that is held together by PP crystallites. Recyclability is confirmed by reprocessing at 170 °C. Furthermore, the here investigated formulations feature a low direct-current electrical conductivity of ∼4 × 10–14 S m–1 at 70 °C and 30 kV mm–1, on a par with values measured for LDPE and XLPE. Evidently, in situ formation of a PE–PP-type copolymer through reactive compounding is a promising approach that may enable the design of thermoplastic insulation materials for power cables.
No takes yet. Share an insight, caveat, or question.
Ouyang et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: