Answers are grounded in this paper and cite their sources.
A two dimensional steady state laminar flow model was established using finite volume software to study the effects of rolling speed and melt pouring temperature on the bonding performance of a copper/aluminum composite plate manufactured using a cast-rolling process. The boundary conditions were optimized in two aspects by writing C language programs. Meanwhile, outlet temperature was measured by thermocouple in the experiment, the maximum error of the simulation and experiment was 2.8%, so the reliability of the simulation analysis was verified. The study found that semi-solid/solid contact time and rolling reduction percentage are the key factors affecting bonding, with pouring temperature and rolling speed changing which factor plays a leading role. The calculated results show that the optimal pouring temperature and casting speed are 963 K and 0.5 m min −1 , respectively. Processing under these conditions results in semi-solid/solid contact time of 2.2 s and rolling reduction of 40% based on simulation results, with experimental peeling strength of 86 N mm −1 . Optical images of surface morphology after peeling show that the failure mechanism of the Cu/Al composite plate is plastic and brittle fracture. This study provides guidance for optimizing cast-rolling processing parameters.
No takes yet. Share an insight, caveat, or question.
Tian et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: