Answers are grounded in this paper and cite their sources.
Zinc ferrite as a desulfurization sorbent with an average crystallite size of about 36 nm was synthesized by a sol−gel auto-combustion method. The precursor for the sorbent was a gel obtained from metal nitrates and citric acid by a sol process. The nitrate−citrate gel exhibits a self-propagating combustion behavior, and after combustion, it can transform into a nanosized spinel structured zinc ferrite directly. The prepared sorbent has a larger specific surface area and higher reactivity when compared with the sorbent achieved by a solid mixing method, and it could efficiently reduce the H 2 S concentration from 6000 ppm to less than 2 ppm at a moderate temperature range. The sulfur capacity at 400 °C reaches about 38.5 g of sulfur/100 g of sorbent, which corresponds to 96.4% of the theoretical value. The temperature programmed oxidation test for the sulfided sorbent shows that the most sulfur is desorbed before 500 °C. XRD results confirm that the sulfided sample after exposure to a 5% O 2 /N 2 gas mixture at 500 °C can be regenerated completely, which indicates that the regeneration temperature of the sorbent prepared by the sol−gel auto-combustion method could be greatly reduced.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: