Key points are not available for this paper at this time.
Although selection of corrosion control optimization strategies is more art than science, utility experiences can provide a basis for rational decision‐making. Utility experience under the Lead and Copper Rule was examined to provide improved insight into corrosion control. Average 90th percentile lead concentrations were highest in very‐low‐alkalinity waters ( 7.40, it appeared that polyphosphate inhibitors had adverse effects on average lead release. Utilities with pH > 7.40 and high‐alkalinity waters had the highest copper concentrations. Phosphate inhibitors were usually beneficial in mitigating copper release; however, most benefits were at utilities with pH > 7.80 and alkalinity < 90 mg/L as CaCO 3 . Inhibitors appeared to adversely affect average copper release in some pH and alkalinity categories.
Dodrill et al. (Sat,) studied this question.