Answers are grounded in this paper and cite their sources.
Demonstrates improved proppant transport simulation in low-viscosity fluids, suggesting enhanced efficiency.
Proppant transport and deposition directly control fracture conductivity during hydraulic fracturing, especially under low-viscosity fracturing fluid conditions where strong convection, settling, deposition, and erosion coexist. To improve the computational efficiency of proppant transport simulation, this study develops a dual-network physics-informed neural network (dual-PINN) framework based on a previously developed fifth-order WENO proppant transport model. In the proposed framework, PINNc is used to predict the proppant concentration field, while PINNhp is used to predict the deposited proppant bed height. The governing physical constraints, including convection, effective diffusion, settling, deposition, and erosion, are embedded into the loss function to achieve coupled concentration–deposition prediction. The model is validated using a benchmark case with a fracture length of 100 m, fracture height of 30 m, fracture width of 0.002 m, injection rate of 0.015 m3/s, and inlet proppant concentration of 0.1. Compared with the fifth-order WENO reference solution, the RMSE values of the predicted proppant concentration at 100 s, 400 s, and 1500 s are 6.36 × 10−3, 7.38 × 10−3, and 8.28 × 10−3, respectively. The offline training time of the dual-PINN model is approximately 15 min, and the trained model requires only about 3 ms for one forward prediction. In comparison, the fifth-order WENO method requires 0.43–22.3 s for a single simulation under the tested mesh resolutions, corresponding to an online speed-up of approximately 143 to 7430. Sensitivity analyses further show that the proposed model maintains stable and physically consistent responses for inlet proppant concentrations of 0.01–0.25 and injection rates of 0.01–0.06 m3/s. These results demonstrate that the proposed dual-PINN framework can provide an efficient mesh-free surrogate for rapid proppant transport prediction and fracturing parameter optimization.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: