Answers are grounded in this paper and cite their sources.
Investigates gas extraction efficiency via optimal horizon for boreholes in coal mining, suggesting improved safety measures.
To achieve safe mining and precise gas control in Liuzhuang Coal Mine, the dynamic evolution of mining-induced overburden fractures at the 150,502 working face was systematically investigated via theoretical analysis, FLAC3D numerical simulation, and field measurements. A 3D model (600 m × 300 m × 154 m) was established to simulate the plastic zone, displacement, and stress fields during face advancement from 50 to 400 m. Strata damage modes were evaluated, and the “two zones” heights were determined based on plastic criteria. The results show that fracture development exhibits distinct stages. The plastic zone displays a “spoon-shaped” distribution, with damage more concentrated on the open-off cut side than the working face side. The caving zone height is approximately 12 m, and the maximum fractured zone height reaches 60 m. Based on key strata theory, a 7 m thick fine sandstone layer 24–31 m above the roof acts as the key stratum controlling overburden deformation, offering stable lithological conditions for gas accumulation and borehole integrity. Field monitoring of cross-stripping boreholes demonstrates that the No. 6 drilling site at the 25 m horizon achieves the highest gas extraction concentration of up to 11%, significantly outperforming the 15 m and 20 m horizons. By integrating multiple methods, the optimal horizon for large-diameter directional boreholes is finalized at 24–31 m, providing a reliable scientific basis for efficient gas drainage under contiguous extra-thick coal seam mining conditions.
No takes yet. Share an insight, caveat, or question.
Ge et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: