Answers are grounded in this paper and cite their sources.
Investigates dust dispersion and control fence efficiency for urban air quality improvement.
Construction dust is a major contributor to urban inhalable particulate matter (PM10) pollution, posing severe respiratory and cardiovascular health risks to construction workers and nearby residents, severely undermining urban environmental sustainability. Construction fences are widely adopted as a primary dust mitigation measure, yet their underlying dispersion mechanisms and comprehensive impacts on vertical air quality remain poorly understood due to the limitations of traditional field monitoring and empirical models, creating critical barriers to site-level pollution control and long-term urban sustainability. In this study, a reliable computational fluid dynamics (CFD) method was developed to investigate the spatial distribution of construction dust and quantify the dust suppression performance of fences with heights ranging from 0 to 3 m. Three mainstream k-ε turbulence models (Standard, RNG, and Realizable) were evaluated using on-site measurement data, and the RNG k-ε model was found to provide the best agreement with field observations, with statistical metrics of q = 1, FB = 0.052, and NMSE = 0.028. The results show that construction fences effectively reduce dust dispersion into the surrounding environment, particularly in the pedestrian breathing zone (z < 1.5 m). Increasing the fence height from 1.5 m to 3 m improves the breathing-zone dust reduction rate from 39% to 55%, with the most significant mitigation effect observed within 50 m downwind of the fence. However, a critical dual effect was identified: while fences suppress near-ground pollution, they induce strong upward airflow and turbulence, leading to elevated dust concentrations in the upper part of the near-ground region (z = 1.5–9 m), a phenomenon absent in the no-fence scenario. These findings provide practical implications for urban construction site management, suggesting that fence height and configuration should be carefully designed not only to reduce pedestrian-level exposure but also to avoid unintended pollutant accumulation aloft, thereby improving overall air quality control strategies and delivering balanced, long-term environmental sustainability at construction sites.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: