Answers are grounded in this paper and cite their sources.
Phenolic resin coatings have widespread use in many technological areas. Surface-active agents are omnipresent in such coatings to adjust their surface wettability, e.g. hydrophilic character, but ultimately it is the interaction between wetting agents (WAs) and phenolic resins that determines the wettability of the coatings. The wetting behaviour of three chemically different WAs and their interaction with phenol-formaldehyde (PF) and phenol-urea-formaldehyde (PUF) coatings was investigated. The non-ionic ethoxylated fatty acid (EFA) phase separates extensively during curing, regardless of the resin used. A strong hydrophilic character can be attained but the EFA rich surface layer is easily depleted, e.g. by tissue wiping. The anionic WAs, a branched alkylbenzene sulphonate (BAS) and an alkyl ethoxylated sulphate (AES), only phase-separate in PF coatings. The presence of urea in PUF coatings provides compatibilization with the anionic WAs resulting in a less strong surface enrichment and thus a lower hydrophilic character, but more stable coatings in terms of retaining the hydrophilicity. The non-ionic agent (EFA) is the only one that can easily diffuse through the PUF coating. High relative humidity induces a drastic, reversible increase in the hydrophilicity of AES-containing coatings, irrespective of the phenolic resin used. Understanding both the WA-polymer resin interactions, and the behaviour of the polymer resin and WAs when exposed to water (or water vapour), provides crucial insights for the optimisation and selection of the appropriate WA for applications where phenolic resin coatings with hydrophilic surfaces are required. • Performance and persistence of wetting agents on phenolic resin coatings probed by successive advancing water contact angles. • Urea acts as compatibiliser between anionic wetting agents and phenolic resin. • Phenol-formaldehyde coatings require lower concentration of WA than phenol-urea-formaldehyde ones, for similar hydrophilicity. • Humidity-dependent response of anionic wetting agent drastically decreases the water contact angle.
No takes yet. Share an insight, caveat, or question.
Moone et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: