Answers are grounded in this paper and cite their sources.
Compacted bentonite/sand mixtures have been adopted as a sealing material for the deep geological disposal of high-level radioactive wastes. However, the heterogeneity of bentonite distribution in the mixtures is inevitable, which impacts their hydro-mechanical behavior. In this study, the swelling pressure tests under constant-volume condition with various bentonite fractions and dry densities were conducted. Afterwards, local dry densities, water contents, and bentonite fractions at various positions were determined. Correspondingly, local degree of saturation was deduced from local water content and global dry density. Microstructural observation was performed by mercury intrusion porosimetry. Results showed that there was more bentonite in center and bottom zones, leading to higher dry densities and degrees of saturation. The heterogeneity was amplified at low bentonite fractions with sand skeleton formation. A critical bentonite fraction was defined as that just needed to fill the large pores inside the sand skeleton after full free swelling. If the bentonite fraction was lower than the critical value, bentonite would swell freely inside the sand skeleton with bentonite aggregate division; otherwise, the swelling of bentonite would be confined with limited aggregate structure change. These findings are helpful for understanding the formation of preferential pathways identified in gas injection tests.
No takes yet. Share an insight, caveat, or question.
Cai et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: