PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
November 9, 2021Advanced Materials239 citations

Controlled Deposition of Zinc‐Metal Anodes via Selectively Polarized Ferroelectric Polymers

View Full Paper
YWYizhou WangTGTianchao GuoJYJian Yin

Key Points

Key points are not available for this paper at this time.

Abstract

Abstract Aqueous zinc‐ion batteries are regarded as ideal candidates for stationary energy‐storage systems due to their low cost and high safety. However, zinc can readily grow into dendrites, leading to limited cycling performance and quick failure of the batteries. Herein, a novel strategy is proposed to mitigate this dendrite problem, in which a selectively polarized ferroelectric polymer material (poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE))) is employed as a surface protective layer on zinc anodes. Such a polarized ferroelectric polymer layer can enable a locally concentrated zinc‐ion distribution along the coated surface and thus enable the horizontal growth of zinc plates. As a result, symmetrical zinc batteries using such anodes exhibit long cycling lifespan at 0.2 mA cm −2 , 0.2 mAh cm −2 for 2000 h, and a high rate performance up to 15 mA cm −2 . Also, the full cell (including a Zn–MnO 2 battery and a zinc‐ion capacitor) based on this anode is demonstrated. This work provides a novel strategy to protect the zinc anode and even other metal anodes exploiting polymer ferroelectricity.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Wang et al. (2021) studied this question.

synapsesocial.com/papers/6a62071e5aedc878c5f55863https://doi.org/10.1002/adma.202106937
Ask AI
Helpful
Bookmark
Share
View Full Paper