Answers are grounded in this paper and cite their sources.
This study presents the performance of a bi-functional catalyst (Co/H-ZSM-5), supported on desilicated H-ZSM-5 zeolite support and promoted with calcium, during Fischer-Tropsch synthesis (FTS). Desilication of the support was via alkaline treatment using 0.2 M NaOH aqueous solution at varied temperature (40 °C, 55 °C, and 70 °C). Co/H-ZSM-5 catalysts were prepared via incipient wetness impregnation, ensuring 10 wt.% of Co in the H-ZSM-5. In total, six catalysts were synthesized and named as follows: Co/H-ZSM-5, Co/H-ZSM-5(40), Co/H-ZSM-5(55), Co/H-ZSM-5(70), Ca-Co/H-ZSM-5, and Ca-Co/H-ZSM-5(55). Textural analysis of the catalysts reveal that the BET surface area of the catalyst increased from 391.81 m2/g to 419.75 m2/g and the CO conversion increased from 49.7% to 84.2% upon H-ZSM-5 desilication. The Co/desilicated H-ZSM-5 catalyst (mesoporous H-ZSM-5) displayed better selectivity toward higher hydrocarbons (C5 – C6+) when compared to the original Co/H-ZSM-5 during FTS. Addition of calcium as a promoter (1 wt.%) to the Co/desilicated H-ZSM-5 further enhanced CO conversion and C5+ selectivity. The hierarchical ZSM-5 obtained via desilication at 55 °C using 0.2 M NaOH aqueous solution was the most efficient support for the cobalt catalyst during FTS. Promotion of the hierarchical ZSM-5 catalyst (Ca-Co/H-ZSM-5(55)) enhanced both CO conversion and the selectivity toward C5 – C6+ to 90.9% and 57.2%, respectively. This study highlights a new approach for further improvement of C5 – C6+ selectivity in FT synthesis.
No takes yet. Share an insight, caveat, or question.
Mudau et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: