Answers are grounded in this paper and cite their sources.
The accumulation of biomass on ship hulls (biofouling) can greatly decrease their fuel efficiency. Many antifouling coatings contain copper as a biocidal agent, which can be released during hull cleanings and is of particular concern when cleaning the hulls in situ (i.e., without dry docking). Previously established voltammetric methods for the detection of copper in seawater using a gold microwire electrode have been modified and adapted to a portable on‐site voltammetric technique. Notable differences from previous voltammetric methods include the use of linear sweep voltammetry, analysis under atmospheric conditions, alternating the potential during the deposition period and the use of dilute nitric acid as an electrolyte. The new modified method has achieved a cell limit of detection (LOD) in HNO 3 electrolyte down to 0.051 ppb and in natural seawater down to 0.089 ppb (below ANZECC guidelines) with minimal sample pretreatment and a deposition time of only 60 s. Preliminary data on the impact of dissolved organic matter (DOM) on electrode stability show tolerance up to at least 5 ppm DOM, potentially as high as 20 ppm, suggesting sample digestion may not be necessary when targeting only dissolved copper species. This instrumentation has direct application for inline, rapid and precise detection of trace, dissolved copper species in seawater during copper removal and remediation practices.
No takes yet. Share an insight, caveat, or question.
Brosnan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: