Key points are not available for this paper at this time.
A hybrid global search algorithm is used to solve the nonlinear problem of calculating slip amplitude, rake, risetime, and rupture time on a finite fault. Thirty‐five strong motion velocity records are inverted by this method over the frequency band from 0.1 to 1.0 Hz for the Northridge earthquake. Four regions of larger‐amplitude slip are identified: one near the hypocenter at a depth of 17 km, a second west of the hypocenter at about the same depth, a third updip from the hypocenter at a depth of 10 km, and a fourth updip from the hypocenter and to the northwest. The results further show an initial fast rupture with a velocity of 2.8 to 3.0 km/s followed by a slow termination of the rupture with velocities of 2.0 to 2.5 km/s. The initial energetic rupture phase lasts for 3 s, extending out 10 km from the hypocenter. Slip near the hypocenter has a short risetime of 0.5 s, which increases to 1.5 s for the major slip areas removed from the hypocentral region. The energetic rupture phase is also shown to be the primary source of high‐frequency radiation (1–15 Hz) by an inversion of acceleration envelopes. The same global search algorithm is used in the envelope inversion to calculate high‐frequency radiation intensity on the fault and rupture time. The rupture timing from the low‐ and high‐frequency inversions is similar, indicating that the high frequencies are produced primarily at the mainshock rupture front. Two major sources of high‐frequency radiation are identified within the energetic rupture phase, one at the hypocenter and another deep source to the west of the hypocenter. The source at the hypocenter is associated with the initiation of rupture and the breaking of a high‐stress‐drop asperity and the second is associated with stopping of the rupture in a westerly direction.
Hartzell et al. (Tue,) studied this question.