Answers are grounded in this paper and cite their sources.
Investigates power loss reduction in megawatt-class converters using IGBT and SiC MOSFET bridges, implying improved efficiency.
This article investigates the design and control of the parallel-hybrid converter (PHC), which consists of parallel connection of a silicon insulated gate bipolar transistor (IGBT) bridge and a partially rated silicon carbide (SiC) mosfet s bridge with a shared dc bus. The IGBT bridge processes the bulk of the power, while switching at a low frequency to maximize efficiency, while the SiC mosfet s bridge's lower relative switching loss is exploited to filter low-order harmonics from the IGBT bridge. A finite-set model predictive controller is detailed that allows IGBT switching frequencies down to 1 kHz to be achieved while also tightly controlling the magnitude of current in the SiC bridge. A genetic algorithm is utilized to automatically tune the control and investigate the design of the output filter as well as the influence of the controller time-step and horizon length on the performance. Power loss estimates of a 1.5 MW application case are made showing potential for significant power-loss reductions. Experimental tests validate an field-programmable gate array (FPGA) implementation of the controller and topologies performance, with IGBT bridge frequencies below 1.2 kHz and grid-current total harmonic distortion below 3% achieved. The ability of converter to switch operation between a high-current and a low-current mode and dynamic performance is also verified.
No takes yet. Share an insight, caveat, or question.
Li et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: