Answers are grounded in this paper and cite their sources.
Due to the limitation of lacking elevation resolution, ground-based interferometric radar suffers from serious layover problem when applied to building deformation monitoring. Ground-based tomographic arc-scanning synthetic aperture ra dar (GB-TomoArcSAR) enables tomography by controlling the antenna to scan multiple times in the horizontal plane of different elevation angles to form an arc-shaped synthetic aperture in the elevation direction. However, when GB-TomoArcSAR uses a baseline with uniformly distributed elevation angles, the excessive number of baseline samples leads to the low efficiency of tomog raphy. To address this issue, this paper proposes a tomographic baseline design method based on coding optimization (TBDCO). Firstly, the sampling positions in the elevation direction are bina ry coded. Then, with the elevation resolution and peak side-lobe ratio (PSLR) of the antenna pointing pattern satisfying specific constraints, a quality evaluation model of the tomographic base line is constructed by weighted summation of the sampling num ber and the Cramer Rao bound (CRB) estimation accuracy in the elevation direction. Finally, the genetic algorithm is employed to iteratively solve the optimal coding to achieve sparse design of the tomographic baseline. Validation using both simulated and measured data demonstrates that the proposed method can re duce the number of elevation samples to 42% of the original before optimization while maintaining tomographic performance, substantially shortening the time for collecting measured data.
No takes yet. Share an insight, caveat, or question.
Tian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: