Answers are grounded in this paper and cite their sources.
Evaluates multilayer gloves' mechanical and X-ray shielding properties, suggesting improved performance with Bi2O3 nanoparticles.
This study evaluated the effectiveness of multilayer design for simultaneous enhancement of the X-ray shielding and mechanical properties with heavy-metal fillers by incorporating nano-Bi 2 O 3 within a middle layer while having pristine NRL as the outer layers, with each layer having a thickness of 1 mm. To assess the benefits of this design, 3-mm-thick single-layer and multilayer NRL gloves containing equivalent nano-Bi 2 O 3 contents ranging from 0 to 200 phr were systematically investigated. The results showed that increasing nano-Bi 2 O 3 content progressively enhanced X-ray attenuation. Specifically, attenuation efficiencies reached approximately 37% for single-layer gloves and 70% for multilayer gloves at 60 kV, with similar trends for other X-ray energies. Mechanical testing also revealed that single-layer gloves exhibited increases in tensile modulus but notable reductions in tensile strength and elongation at break after adding fillers. In contrast, multilayer gloves, while having similar mechanical trends, maintained superior mechanical performance due to the presence of pristine NRL outer layers that improved the transfer of external forces. Furthermore, based on ASTM D7866 and ASTM D3578, the recommended equivalent nano-Bi 2 O 3 content for single-layer gloves was restricted to 80 – 100 phr, whereas a substantially wider range of 30 – 140 phr was achieved for the multilayer structure.
No takes yet. Share an insight, caveat, or question.
Khamnuandet et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: