Answers are grounded in this paper and cite their sources.
This study aims to propose a numerical prediction method for the physical properties of injection molded products made of short-fiber reinforced thermoplastics. A new numerical prediction method was developed by introducing the concepts of fiber orientation distribution (FOD) and fiber volume fraction distribution (FVD) into the mixture law based on Voigt and Reuss approximation. Polyamide 6 containing 30 wt% short glass fibers was compounded, and 100-mm square plates which had 2 mm thickness were prepared by injection molding. Square plate samples were cut to dumbbell shape for physical tests, and the tensile properties in the in-plane direction and the fiber orientation state internal dumbbell samples were quantitatively evaluated. Using the measured data of FOD and FVD internal dumbbell samples, physical properties of dumbbell samples were predicted by using the new numerical method and compared with the results of evaluation of tensile properties obtained from experiments. The results show that the predicted tensile modulus and stiffness modulus were in good quantitative agreement with the experimental results, indicating that the consideration of FOD and FVD is effective in predicting the physical properties of injection molded products made of short-fiber reinforced thermoplastics.
No takes yet. Share an insight, caveat, or question.
Hamanaka et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: