Key points are not available for this paper at this time.
Abstract A novel polymer encapsulation strategy to synthesize metal isolated‐single‐atomic‐site (ISAS) catalysts supported by porous nitrogen‐doped carbon nanospheres is reported. First, metal precursors are encapsulated in situ by polymers through polymerization; then, metal ISASs are created within the polymer‐derived p‐CN nanospheres by controlled pyrolysis at high temperature (200–900 °C). Transmission electron microscopy and N 2 sorption results reveal this material to exhibit a nanospheric morphology, a high surface area (≈380 m 2 g −1 ), and a porous structure (with micropores and mesopores). Characterization by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure confirms the metal to be present as metal ISASs. This methodology is applicable to both noble and nonprecious metals (M‐ISAS/p‐CN, M = Co, Ni, Cu, Mn, Pd, etc.). In particular, the Co‐ISAS/p‐CN nanospheres obtained using this method show comparable ( E 1/2 = 0.838 V) electrochemical oxygen reduction activity to commercial Pt/C with 20 wt% Pt loading ( E 1/2 = 0.834 V) in alkaline media, superior methanol tolerance, and outstanding stability, even after 5000 cycles.
Han et al. (Tue,) studied this question.