Answers are grounded in this paper and cite their sources.
Evaluates methanol synthesis from CO2 hydrogenation in various solvents, suggesting optimal processes for efficiency and cost reduction.
This paper focuses on a liquid-phase CO 2 hydrogenation process for methanol synthesis to enhance CO 2 conversion. The feasibility of a liquid-phase CO 2 hydrogenation process is comprehensively evaluated through a techno-economic analysis. The solvent tetraethylene glycol dimethyl ether is identified as one of the most favorable options following an analysis of the solubility data pertaining to various solvents and their influence on the reaction equilibrium of the substances within the system. The influence of process parameters, including temperature, pressure, solvent amount, and gas hourly space velocity (GHSV), on the conversion of CO 2 and the selectivity for methanol is examined and optimized in a liquid-phase CO 2 hydrogenation to methanol process without a gas recycle (Process 1), optimal reaction conditions are determined and a CO 2 conversion of 95.19 % and a CH 3 OH yield of 94.77 % with a purity of 99.9 % are achieved. A liquid-phase process with a gas recycle (Process 2) is implemented to enhance the utilization of feed gas, achieving a CO 2 conversion rate of 95.23 % and a methanol yield of 99.69 %. The liquid-phase process is further optimized by incorporating reactive distillation technology (Process 3), to enhance reaction efficiency and reduce energy consumption. Following the techno-economic evaluation, the energy efficiency of Process 3 is 7.79 % and 4.99 % higher than that of Process 1 and Process 2, respectively. The product cost of Process 3 is reduced by 8.75 % compared to Process 1 and by 4.25 % compared to Process 2. This research offers insights into the challenges associated with the development of the liquid-phase method. • Feasibility of a liquid-phase CO 2 hydrogenation process is evaluated. • Single-pass CO 2 conversion is enhanced by adding the solvent. • Polar solvents are preferred over other types of solvents. • CO 2 single-pass conversion in the liquid-phase processes reaches over 95 %. • The liquid-phase process incorporates reactive distillation to enhance reaction efficiency and reduce energy consumption.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: