Answers are grounded in this paper and cite their sources.
In this study, Ce1−xSmxO2−δ (x = 0.0, 0.1, 0.2, 0.3, 1.0) were synthesized for use in solid oxide fuel cells (SOFCs) using an environment-friendly method of coprecipitation followed by hydrothermal treatment. XRD and TGA results revealed that the gels after coprecipitation appeared to comprise a cubic CeO2 phase with some water or hydroxyl groups attached and a Sm(OH)3 precipitate. After subsequent hydrothermal treatment, the samples with CeO2 and Sm(OH)3 precipitates were observed to be converted into a single-phase fluorite structured Ce1−xSmxO2−δ, as confirmed by Raman spectra, whereas the sample with pure Sm(OH)3 precipitates remained unchanged after treatment. FESEM and HRTEM images showed that the synthesized Ce1−xSmxO2−δ nanopowders appeared to be spherical-like particles with a single-crystal structure and a uniform particle size of 10–30 nm. The samarium dopant, when increased to 30 mol% in the Ce1−xSmxO2−δ, seemed to trigger the formation of a few nanowires with a length of ≈400 nm. The sintered Ce0.8Sm0.2O2−δ ceramics registered an electrical conductivity of 0.048 S/cm at 700 °C and an activation energy of 0.73 eV, similar or superior to those reported in the literature. The feasibility of using the Ce1−xSmxO2−δ nanopowders prepared by coprecipitation-hydrothermal method in SOFCs was confirmed.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: