Answers are grounded in this paper and cite their sources.
Chloride-induced corrosion poses a serious threat to the durability of coastal concrete structures. To enhance their safety, a novel and sustainable reinforcing approach employing textile-reinforced one-part engineered geopolymer composite (TREGC) is proposed in this study. The interfacial bond performance between TREGC and normal concrete (NC), a key factor governing structural durability and reliability, is systematically investigated through push-out tests on cylindrical specimens. A total of 72 specimens were fabricated to investigate the effects of surface treatment, reinforcement type, and chloride immersion duration. Three different failure modes were observed: interfacial debonding failure, epoxy debonding failure, and NC cohesion failure. Replacing EGC with TREGC reinforcement resulted in an approximately 20% increase in ultimate interfacial bond stress. Specimens with chiseled surface treatment exhibited the highest ultimate interfacial bond stress, with a 120% increase compared to those with smooth surface treatment. An interfacial bond stress-slip model was subsequently established for TRECC/TREGC-NC interfaces under chloride environments, which showed excellent agreement with experimental data with an average R² of 0.96. Furthermore, the sustainability of the reinforcing materials was assessed, revealing that EGC provides remarkable environmental benefits over ECC by reducing carbon emissions and embodied energy by 26% and 27%, respectively.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: