Answers are grounded in this paper and cite their sources.
OBJECTIVES: This laboratory study compared the effects of various post systems on the fracture resistance of endodontically treated mandibular premolars. METHOD AND MATERIALS: Thirty-two extracted mandibular first premolars were collected, endodontically treated, and assigned into four test groups (n = 8). The classification was based on the post material as follows: traditional glass-fiber posts (TFP), traditional titanium posts (TTP), coated glass-fiber posts (CFP), and coated titanium posts (CTP). The posts were cemented with a dual-curing luting composite resin. Each specimen, which was prepared with a 2-mm ferrule height, received a composite resin core. All specimens were restored with cast CoCr crowns, which were cemented with glass-ionomer cement. All specimens were submitted to dynamic loading in a dual-axis chewing simulator for 1,200,000 cycles with a nominal load of 5 kg and simultaneous thermal cycling (5 to 55°C). Each specimen was secured in place and loaded at 30 degrees using a universal testing machine until fracture occurred. The results obtained were analyzed using one-way ANOVA and the fracture modes were investigated under stereomagnification (25×). RESULTS: Fracture loads were as follows: 858 ± 216 N for CTP, 953 ±134 N for TFP, 979 ± 219 N for CFP, and 1,130 ± 286 N for TTP group. One-way ANOVA revealed no statistically significant differences among the test groups (P = .112). CONCLUSIONS: Under the conditions of the current study, no significant fracture resistance differences were found between teeth with the different prefabricated post systems.
No takes yet. Share an insight, caveat, or question.
Samran et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: