Answers are grounded in this paper and cite their sources.
We have studied the impact of various device parameters including surface acoustic wavelength ( λ ), interdigital transducers (IDT) finger apertures (L IDT ), number of reflector gratings (N ref ), and reflector types on the performance of one-port type AlN based SAW resonators on sapphire systematically. Experimental results indicate that the acoustic velocity of 1 µ m-AlN/sapphire bilayer structure is 5536 m s −1 , 60% higher than that of LiNbO 3 when λ is 8 µ m. For 1 µ m-AlN/sapphire bilayer structure, resonators with λ of 8 µ m exhibit better performance than that of resonators with λ of 12 µ m and 16 µ m, with an electromechanical coupling coefficient ( ) of 0.168%, and S 11 magnitude difference at resonant and anti-resonant frequency (ΔS 11 ) of 0.42 dB. Both ΔS 11 and of resonators will increase sharply with the increase of L IDT from 80 µ m to 240 µ m, exhibiting 140% and 150% improvement, respectively. The of resonators will increase 38% with the increase of N ref from 100 to 300. The impact of reflector types including open-circuited and short-circuited reflectors on performance of resonators is not obvious.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: