Answers are grounded in this paper and cite their sources.
This paper presents the first single-chip direct-conversion 77-85 GHz transceiver fabricated in SiGe HBT technology, intended for Doppler radar and millimeter-wave imaging, particularly within the automotive radar band of 77-81 GHz. A 1.3 mm times 0.9 mm 86-96 GHz receiver is also presented. The transceiver, fabricated in a 130 nm SiGe HBT technology with fT/fMAXof 230/300 GHz, consumes 780 mW, and occupies 1.3 mm times 0.9 mm of die area. Furthermore, it achieves 40 dB conversion gain in the receiver at 82 GHz, a 3 dB bandwidth extending from 77 to 85 GHz at 25degC, and covering the entire 77-81 GHz band up to 100degC, record 3.85 dB DSB noise figure measured at 82 GHz LO and 1 GHz IF, and an IP1dBof -35 dBm. The transmitter provides + 11.5 dBm of saturated output power at 77 GHz, and a divide64 static frequency divider is included on-die. Successful detection of a Doppler shift of 30 Hz at a range of 6 m is shown. The 86-96 GHz receiver achieves 31 dB conversion gain, a 3 dB bandwidth of 10 GHz, and 5.2 dB DSB noise figure at 96 GHz LO and 1 GHz IF, and -99 dBc/Hz phase noise at 1 MHz offset. System-level layout and integration techniques that address the challenges of low-voltage transceiver implementation are also discussed.
No takes yet. Share an insight, caveat, or question.
Nicolson et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: