Answers are grounded in this paper and cite their sources.
In most countries, low- and intermediate-level wastes (LILWs) are cemented in carbon steel drums for later disposal. The durability of waste packages is determined by the chemical environment generated by both cement-based engineered barrier systems and the aggressive species present in the waste. Decontamination sludges are challenging wastes that are currently not accepted for final disposal due to their acidic nature and high concentrations of organic species and complexants. Thus, it was proposed to use electrochemical measurements to study the corrosion of steel sheets, simulating drums embedded in new alkali-activated slag (AAS) formulations with surrogate decontamination liquids, and determine their viability for use as confining matrices in order to increase the service life of the drums. The carbon steel coupon embedded in the Portland cement reference (R-L) paste showed the best corrosion resistance, followed by that of steel embedded in sodium silicate-activated slag (BFS-S-L) paste. This behaviour may be related to an improvement in the protective nature of the surface film. However, in sodium carbonate-activated slag (BFS-C-L) paste, the effect of the sludge in the matrix seemed to be more intense, leading to a pH decrease in the paste porewater, an effect that could hinder the formation of a passive layer on the surface of the carbon steel. Under such conditions, the initiation of the corrosion process seems to be favoured, resulting in the formation of a non-protective scale consisting mainly of hematite.
No takes yet. Share an insight, caveat, or question.
Criado et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: