Application and Microstructure Properties of Nanomaterials in New Concrete Materials

This article takes the application of nanomaterials in new concrete materials as the research object and explores the defects of nanomaterials in improving the toughness and tensile capacity of traditional concrete by analyzing the effects of nanomaterials on the structure and properties of new concrete. This article takes the application of nano‐SiO 2 in new concrete materials as an example. Firstly, the experiment of preparing nanoconcrete was carried out, and then, aiming at the experimental results, a detailed analysis and discussion on the effects of nano‐SiO 2 on the shrinkage, mechanical properties, and microstructure of the new concrete materials were carried out. The research results show that the cement paste with nano‐SiO 2 is much better in chemical shrinkage than the cement paste without admixture, and the chemical shrinkage value of the cement paste with nano‐SiO 2 increases significantly in the early setting stage. The chemical shrinkage values are 11.4%, 26.7%, 53.9%, and 94.2%, respectively, according to the amount of nano‐SiO 2 added. With the extension of the setting period, the growth rate of the shrinkage value of cement paste slows down; nano‐SiO 2 can improve the compressive capacity and strength of concrete, and with the increase of the amount of compressive strength, the value of compressive strength is also increasing. In the early stage of coagulation, when the nano‐SiO 2 dosage is 1.6%, the compressive strength of the coagulation for 3 days is 39.02%. With the prolongation of the setting period, the increase in compressive strength continues to increase, but the growth rate slows down; the addition of nano‐SiO 2 has changed the microstructure of concrete. Nano‐SiO 2 has high pozzolanic activity, which can promote the hydration process of cement, and because of the small particles, it can fill the voids of concrete, thereby improving its compactness and mechanical strength.