Answers are grounded in this paper and cite their sources.
Identifies a new microstructural pattern in micro-drilling of composites, suggesting optimization strategies.
The growing adoption of hybrid thermoplastic composites in lightweight advanced structures has heightened the need to understand their behavior during micromachining operations, yet research in this domain remains scarce. In this work, the microdrilling behavior of a PA6–Glass/PA6–Carbon hybrid composite was investigated, with an emphasis on the thermomechanical response and hole-boundary integrity. The results indicate that spindle speed is the primary parameter controlling temperature elevation; however, under all tested conditions, the measured temperatures remained below the matrix melting and degradation thresholds. Microscopic examination of the drilled holes revealed that edge quality and the prevalence of partially sheared fibers were highly influenced by the combined interaction of spindle speed and feed rate. Image analysis revealed a distinct and previously unreported phenomenon, termed Annular Fiber–Chip Accumulation (AFCA), which appeared only under specific parameter combinations and whose morphology was likely driven by restricted chip evacuation in the confined micro-drilling zone. Moreover, the developed temperature model showed a strong agreement with the experimental data, as indicated by the high coefficient of determination and adjusted coefficient of determination values (R 2 = 99.29% and R 2 adj = 98.42%). These results suggest that the model can adequately describe the variation of drilling-zone temperature within the investigated range of machining parameters. By identifying and characterizing a new microstructural pattern along the inner hole boundary, and clarifying its relationship with processing parameters, this study provides new insights to support the optimization of micro-drilling operations in hybrid thermoplastic composites.
No takes yet. Share an insight, caveat, or question.
Baradaran et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: