Answers are grounded in this paper and cite their sources.
Demonstrates improved photodetection performance in gallium oxide-based devices, suggesting effective defect engineering.
Solar‐blind ultraviolet (UV) photodetectors (SBPDs) play a critical role in applications including UV communication and fire warning systems. Gallium oxide (Ga 2 O 3 ) has emerged as a promising material due to its wide bandgap and low cost, but suffers from high dark current and slow response speed caused by oxygen vacancy ( V O ) defects. This work proposes a defect engineering strategy using Mg doping to modulate oxygen vacancy formation energy, fabricating Mg‐doped β‐Ga 2 O 3 (β‐Ga 2 O 3 :Mg) thin‐film photodetectors via low‐cost chemical vapor deposition (CVD). The doping of Mg suppresses the generation of V O and broadens the bandgap, which significantly improves the photodetection performance. Experimental results demonstrate that Mg doping achieves a 23% reduction in V O concentration and increases the bandgap from 4.72 to 4.87 eV. The optimized device exhibits a photo to dark current ratio of 10 6 (compared to 10 4 for pristine Ga 2 O 3 ), ultralow dark current of 2.67 × 10 −12 A at 20 V, detectivity of 1.576 × 10 14 Jones and response times reduced to 14.7 ms (rise)/7 ms (decay) (318.1 ms/187.5 ms for undoped devices). The photodetector successfully demonstrates UV single‐point scanning imaging, clearly displaying “H,” “U,” and “I” letter patterns, and maintains stable performance during 1500‐second continuous illumination. This work combines defect engineering with low‐cost fabrication to provide a cost‐effective reliable solution for high‐performance SBPDs.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: