Answers are grounded in this paper and cite their sources.
Study models fragmentation behavior in granite, indicating differences from sedimentary rocks.
The difficulty of fracturing hard crystalline rocks, such as granite, remains a major obstacle to the efficient development of geothermal and mineral resources. Percussive drilling, as an impact-based drilling technique, shows strong potential for achieving higher penetration rates in hard formations; however, the mechanisms governing rock fracturing under impact loading remain insufficiently explained. Current numerical tools are still unable to faithfully and simultaneously capture the experimentally observed rock pulverisation, fragment ejection, and the markedly different crack networks formed in granite compared with sedimentary rocks (i.e., limestone and sandstone). Moreover, phenomena such as the variation of bit rebound response and the intensified rock pulverisation with increasing piston impact energy have not yet received sufficient attention or investigation. In this study, a damage model was developed within a Combined Finite-Discrete Element (FDEM) framework to simulate the fragmentation behaviour of Kuru Grey granite under percussion loading. Particular attention was paid to the combined effect of damage evolution and frictional contact behaviour. The model successfully reproduces the characteristic failure modes of granite, which are fundamentally different from the sedimentary rock (i.e., limestone and sandstone), and accurately captures the nonlinear variations in bit rebound behaviour and rock pulverisation as the impact energy increases. Validation against seven quantitative metrics - covering bit motion and rock fragmentation characteristics - demonstrates a high level of agreement between the numerical results and experimental observations. The simulations further reveal that the generation of chipping in hard granite differs significantly from that in limestone and sandstone. In limestone and sandstone, chipping is mainly driven by tearing induced by the elastic recovery of the rock. In contrast, chipping in granite is primarily generated by impacts from high-velocity pulverised rock fragments ejected during bit penetration.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: