Answers are grounded in this paper and cite their sources.
Maps deformation heterogeneity in DED joints using DIC and SEM, indicating insights for repair welding.
Over the past decade, an additive manufacturing technology called laser‐based directed energy deposition (DED) has gained popularity in joining dissimilar materials because it leads to a smaller heat‐affected zone than the other material joining technologies. For repair welding of expensive parts, a popular DED technique called laser cladding is increasingly being used to yield cost savings. Several studies in the literature have used scanning electron microscope (SEM) to characterize the graded microstructure of a laser clad joint. Over sharp bimetal interfaces created by laser DED, a graded microstructure is often reported. Nevertheless, less attention has been paid to map such graded microstructure produced by laser DED to the inherent deformation heterogeneity at a ‐length scale. In the present work, we use digital image correlation (DIC) together with SEM for the first time to fill this research gap. A bimetal joint is created by fusing Stellite (a Co–Cr alloy) on to Nicrofer (a Ni–Cr–Mo alloy) through DED. Standard test specimens, wherein Stellite is centred in the gauge area of the test specimens and runs through the specimen thickness, are subjected to standard uniaxial tensile tests upto failure by fracture. Using energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD) in SEM, the changes in both grain morphology and material composition are traced to identify four distinct domains, namely, unaffected Nicrofer, heat affected Nicrofer, transition zone and Stellite clad. The local strain evolution of this graded microstructure during the tensile deformation of the bimetal joint is recorded using DIC. Both Vickers hardness and EBSD measurements show a qualitative agreement with the von Mises strain maps. The full‐field strain mapping by DIC thus serves as a quantitative evaluation of the heterogenous tensile behaviour of the graded microstructure, providing valuable insights into the mechanical behaviour of DED joints that are commonly seen in repair welding applications.
No takes yet. Share an insight, caveat, or question.
Pawar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: