Answers are grounded in this paper and cite their sources.
Experimental and numerical analysis reveals the effectiveness of sand-based thermal energy storage for solar applications.
This study presents an experimental and numerical investigation of a sand-based thermal energy storage (TES) system integrated with a helical coil heat exchanger (HCHE) for solar thermal applications. The effects of Al2O3–Therminol VP-1 nanofluid concentrations (0.1 % and 0.3%) on heat transfer characteristics, pressure drop, and exergy loss were evaluated through experimental measurements and COMSOL Multiphysics simulations. Experiments were conducted in Ranchi, India, under clear-sky conditions during March 2024 using a stainless-steel cylindrical TES unit containing 48.33 kg of sand and a copper helical coil with an average diameter of 0.265 m and 11 turns. The results showed that the exergy loss varied between 0.15 and 0.223 kW, while the overall heat transfer coefficient increased with temperature and reached a maximum value of 2.19 W/m2·K. Comparative analysis indicated that the 0.3% nanofluid concentration provided improved thermal performance and lower exergy losses compared to the 0.1% concentration. The total embodied energy and system cost were estimated as 17,521.33 MJ and INR 42,455 (441.55 USD), respectively. Environmental assessment showed a CO2 mitigation potential of approximately 1.02 kg/kWh, corresponding to an annual reduction of 579.82 kg of CO2 emissions. Numerical predictions obtained using COMSOL Multiphysics 6.0 showed good agreement with the experimental data, confirming the capability of the developed model to predict the thermal behavior of the proposed TES system. The findings demonstrate that sand is a cost-effective and environmentally sustainable thermal energy storage medium for solar thermal applications.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: