Answers are grounded in this paper and cite their sources.
Investigates printability and bond strength of a sustainable cement composite, suggesting optimization techniques for 3D printing.
This study investigates the printability, mechanical performance, and interlayer bond behavior of a sustainable 3D printable cementitious composite containing 60% ground granulated blast furnace slag (GGBFS) as a replacement for ordinary Portland cement (OPC). Printability was evaluated through flowability, buildability, extrudability, pumpability, and green strength and compared with a reference mix containing 90% OPC and 10% silica fume. Mechanical testing assessed compressive and flexural strength and printing-induced anisotropy. Interlayer bond strength, evaluated at 7, 14, and 28 days, was highly sensitive to printing parameters. Increasing the print interval from 30 s to 20 min reduced bond strength by 30%–51%, whereas increasing the nozzle stand-off distance from 9.5 mm to 12.7 mm increased bond strength by 28.4%–49%. Plastic-covered curing improved compressive and flexural strength by 15.6% and 41.9%, respectively, compared with air curing. These findings provide practical guidance for optimising sustainable 3D-printed cementitious composites.
No takes yet. Share an insight, caveat, or question.
Rahman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: