Answers are grounded in this paper and cite their sources.
Shows improved thermal performance and reduced costs in residential buildings, implying better energy efficiency.
A major challenge in the optimization of thermal performance of opaque envelope components is that the calculation workload of energy consumption simulations of full factorial combinations leads to a prohibitive increase as the factors and levels multiply. Nevertheless, a reliable method for designing calculation schemes to reduce the calculation workload without sacrificing the accuracy of the results is still lacking. Accordingly, a building energy consumption simulation scheme (BECSS) based on a uniform design method (UDM) was proposed, and its feasibility was verified. A multiobjective optimization model (MOM) with the life cycle cost (LCC) and life cycle carbon emission (LCCE) as optimization objectives was established, and it was solved using the non-dominated sorting genetic algorithm-II (NSGA-II). Furthermore, an entropy-based TOPSIS method was introduced to calculate the optimal insulation thickness (OIT) of opaque building envelopes in severe cold and cold zones. The proposed framework was demonstrated through a case study of a typical residential building in Xuzhou. Extruded polystyrene panels (XPS) were used as insulation materials, and coal-fired boiler (CFB), gas-fired boiler (GFB), and air source heat pump (ASHP) were used as heat sources. Compared with the results specified by the current energy conservation standards, the MOM could achieve a balance between energy savings and environmental benefits. The LCCs change by −3.16–11.34%; nevertheless, the thermal performance of the external wall improves by 42.32–49.31%, while that of the roof improves by 6.46–21.59%; the building energy consumption (BEC) levels and the LCCEs are reduced by 25.24–30.16% and 19.25–24.74%, respectively. The indicator weights determined via the entropy weight method underscore the necessity of incorporating environmental performance indicators in the optimization of thermal performance of opaque building envelope components.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: