Answers are grounded in this paper and cite their sources.
Only a limited aluminium material palette is currently available for L-PBF processing, especially for high strength aluminium alloy. Unmodified Al7075 suffers from hot cracking making it nearly impossible to process by L-PBF. Adding some grain refiner to Al7075 solves this issue of hot cracking. However, this alloy still presents difficulties to be processed with densities above 99.5%. In this study, the unconventional pre-sintering scanning strategy is applied to process 99.9% density Al7075+1.8%Zr. For this scanning strategy, each layer is scanned twice with different power, i.e. it is first scanned with half the power selected for the second scan. This specific strategy remelts potential defect generated by the first scan and reduces lack of fusion pores. These two phenomena lead to high density L-PBF Al7075+1.8%Zr and pave the way to higher densities for high strength aluminium alloys. • ZrH 2 addition to pre-alloyed Al7075 suppresses hot cracking during L-PBF processing. • Pre-sintering scanning strategy leads to 99.9% dense Al7075+1.8%Zr. • Pre-sintering decreases the amount of lack of fusion pores. • Pre-sintering refines the gains and does not impact H outgassing.
No takes yet. Share an insight, caveat, or question.
Nothomb et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: