Answers are grounded in this paper and cite their sources.
Sun experiments were performed to develop methods for accurately mapping the Sun noise temperatures over the entire solar disk at 32 GHz (Ka-band). Highresolution mapping of the Sun’s noise temperatures was obtained through the use of the 34-m beam-waveguide (BWG) antenna and the Ka-band monopulse receiving system at DSS 13. Detailed mapping of the solar disk was possible because at 32 GHz the BWG antenna has a full 3-dB beamwidth that is only 17 mdeg compared to the angular Sun diameter of about 0.5 deg. Due to the expected high noise temperature of the Sun (>10,000 K), methods had to be developed so that the incoming Sun noise-temperature power would not saturate the antenna receiving system. Of several methods investigated, only the absorber and waveguide attenuator methods were considered (1) to be easy and inexpensive to implement into any existing BWG receiving system and (2) to have the potential of giving accurate results. Both of these methods were used to measure the Sun noise temperatures presented in this article.
No takes yet. Share an insight, caveat, or question.
T. Y. Otoshi (2001) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: