Answers are grounded in this paper and cite their sources.
A kind of conductive pen was designed, prepared with nano-silver colloid as the conductive ink and gel-ink pen as the writing implement, and used to draw conductive patterns on paper substrate by direct-writing for flexible electronics. Silver nanoink (20 wt%) was characterized using field emission transmission electron microscopy (FETEM), size distribution analyser (SDA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and selected-area electron diffraction (SAED). Paper-based conductive patterns were investigated by a surface profilometer, a 4-point probe, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. It can be found that silver nanoparticles have a small size, about 2.1 ± 0.5 nm in diameter with monodispersity, and the melting point sharply decreased to 105 °C. A conductive line drawn on weighing paper not only had good mechanical/electrical fatigue properties, but also low resistivity. Especially, when the sintering condition is 200 °C for 60 min, the resistivity can be down to 6.8 μΩ cm, 4.25 times the bulk resistivity. In addition, the reparation of conductive patterns and application in a practical circuit were also studied.
No takes yet. Share an insight, caveat, or question.
Tai et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: