Answers are grounded in this paper and cite their sources.
We present a simple method for simultaneous measurement of thermo-optic and stress-optic coefficients of polymer thin films by measuring the film refractive indices as a function of temperature (dn/dT). Usually, such dn/dT value is considered as the thermo-optic coefficient. However, in the thin film systems, the measured dn/dT values result from both the thermo-optic and stress-optic effects. To demonstrate the stress-induced effects, the dn/dT values have been investigated for two different polymers: benzocyclobutene (high film stress) and epoxy 3505 (negligible film stress), using a prism coupler technique. The finite element method has been used so as to predict the stresses in the polymer film and, by combining them with the experimental dn/dT values, the individual thermo-optic and stress-optic coefficients have been determined. We found that the obtained thermo-optic coefficient is significantly different than the measured dn/dT values. The method is generic in nature and can thus be applied to a wide range of polymer waveguide materials.
No takes yet. Share an insight, caveat, or question.
Hossain et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: