Answers are grounded in this paper and cite their sources.
Experimental study determines key factors affecting warpage in thin-walled ABS and PC parts, highlighting implications for improved manufacturing processes.
This study emphasizes the warpage phenomenon of thin-walled parts using acrylonitrile-butadiene styrene (ABS) plus polycarbonate (PC) plastics for optimal processing by thin-wall injection molding. The authors first employed the Moldflow software to analyze the runner’s balance on multicavities for thin-walled parts and to simulate the warpage of thin-walled parts with thin-wall injection molding. Then, this study used those data to fabricate a real mold by computer numerical control machining. For this study, the authors fabricated thin-walled parts and measured their warpage using various process parameters (injection speed, injection pressure, mold temperature, packing time, and melt temperature) with thin-walled injection molding. Finally, the authors found that the most important processing parameter was the packing time for warpage phenomenon of thin-walled parts by thin-wall injection molding.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: