Answers are grounded in this paper and cite their sources.
Background Numerical modelling is essential for understanding landslide flow, as it can simulate a range of scenarios. Yet most models use single or two phase systems that include only solids and pore fluids, potentially oversimplifying landslide complexity. Methods This study examines how converting fine-solid particles into fluid and the exchange of momentum affect landslide movement using a three-phase mass flow model. Three conditions were tested: a Constant Model without internal phase transfer, a Mass Model with transfer of fine-solids to fluid, and a Mass-momentum Model with both mass and momentum exchange. Result Simulations show that all three models yield nearly identical maximum affected areas, run-out distances, peak velocities, and flow depths. The Constant Model preserves its initial phase composition, whereas the Mass and Mass-momentum Models gradually convert fine-solids into fluid, producing a more fluid-like response and a steadier redistribution of depth and velocity during propagation and deposition. The Mass-momentum model is more physically consistent because the transferred material carries momentum, slightly increasing front accumulation and smoothing the redistribution. Sensitivity analysis reveals that the mass-transfer rate has a greater impact on the affected area, depth, and velocity than the momentum-transfer coefficient. Field comparisons confirm that the simulations reproduce the main landslide-affected areas and longitudinal travel distance, though discrepancies remain in the distal deposition zone. Conclusion These results indicate that incorporating mass transfer and mass-momentum exchange improves the physical representation of phase transition and internal landslides.
No takes yet. Share an insight, caveat, or question.
Apriani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: