Answers are grounded in this paper and cite their sources.
NaCl solution (0.5 M) of pH 2 was electrolyzed at 1000 Am−2 at room temperature. Addition of Pt4+ and Fe3+ to the prepared MnMo-oxide anode deposited on IrO2/Ti substrate, significantly improves the performance of anode for the oxygen evolution reaction (OER) during NaCl electrolysis. After 2000 h of electrolysis, the oxygen evolution efficiency (OEE) is in the order of MnMoPt-oxide > MnMoFe-oxide > MnMo-oxide anodes with 100%, 99%, and 93.2% OEE, respectively. The loss in weight of MnMo-oxide is reduced from about 13% to 3.2% and 0.0% by addition of iron and platinum cations, to the deposition electrolyte. The mean average grain size of MnO2, MnMo-, MnMoFe- and MnMoPt-oxide deposits prepared in electrolytes of pH 0.0 are in the range of 25.5, 16.22, 13.5 ∼ 16.5 and 13 ∼ 17.5 nm, respectively. The physicochemical properties of the deposits were characterized using X-ray diffraction spectroscopy (XRD), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM) and electrochemical techniques. EDX analysis illustrates that IrO2/Ti is stable during the deposition process and behaves only as conductive substrate. SEM illustrates that, all elements constituting MnMoPt- and MnMoFe-oxide deposits are homogeneously distributed in the oxide surface.
No takes yet. Share an insight, caveat, or question.
Shahba et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: