Answers are grounded in this paper and cite their sources.
In this study, Single-Walled Carbon Nanotubes (SWCNTs)-Nafion-Ionic Liquid (IL) composite modified Screen-Printed Electrode (SPE) (SWCNTs-Nafion/IL/SPE) was developed for the sensitive detection of trace Pb (II) in soil using Square Wave Anodic Stripping Voltammetry (SWASV) technique. The Bi/SWCNTs-Nafion/IL/SPE sensor was fabricated by the in-situ plating of bismuth ions on the SWCNTs-Nafion/IL/SPE surface. The morphologies and electrochemical properties of this modified SPE were characterized by Scanning Electron Microscopy (SEM), Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and SWASV. The experimental parameters, such as pH value, Bi(III) concentration, deposition potential and deposition time, were optimized. The specific surface area and electron transfer capacity of the modified SPE were improved by the presence of SWCNTs, and the abilities of cation-exchange and metal ions pre-concentration were further enhanced by Nafion. Moreover, the existence of IL increased the conductivity of the composite. The detection limit of the developed sensor was 0.1 μg/L (S/N = 3) in the range of 1.0 to 100.0 μg/L for Pb (II). Finally, the Bi/SWCNTs-Nafion/IL/SPE was applied for detecting Pb (II) in real soil samples and the average recovery of 95.12% was obtained with satisfactory results.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: