Answers are grounded in this paper and cite their sources.
Evaluates pick-and-place reliability in low-cost robotics, implying practical automation benefits.
Purpose This study aims to design, fabricate and experimentally validate a low-cost robotic manipulator capable of executing flexible point-to-point pick-and-place operations based on user-defined motion. This study focuses on improving the positioning accuracy and operational reliability of affordable robotic platforms through closed-loop joint control. Design/methodology/approach The proposed system consists of a robotic arm controlled using an Arduino Mega platform and driven by a stepper-servo actuation architecture. Closed-loop joint position feedback was implemented using rotary encoders integrated at each joint, enabling the accurate execution of the commanded end-effector motions. The mechanical design, kinematic modelling, joint-level proportional-integral-derivative control strategy, and experimental procedures for command-based point-to-point motion and pick-and-place tasks are described in detail. The system performance was evaluated through repeated experimental trials using pre-defined motion commands. Findings Experimental results demonstrate that the proposed closed-loop robotic manipulator achieves positioning repeatability within ± 0.2 mm during point-to-point motion. Pick-and-place experiments confirmed the reliable execution of the commanded trajectories, with a grasp success rate exceeding 95% for the representative test objects evaluated in this study. Compared with the baseline open-loop configuration, the proposed closed-loop system exhibited improved motion consistency, enhanced positioning stability, and reduced estimated energy usage during repetitive manipulation tasks, thereby demonstrating the practical advantages of encoder-based feedback control in low-cost robotic applications. In contrast to many existing low-cost robotic manipulation studies that primarily report isolated motion-control performance, the proposed framework provides integrated task-level experimental validation, including positioning repeatability, task success rate, cycle-time stability and energy analysis under repeated operating conditions. This comprehensive evaluation framework improves the practical relevance and experimental reliability of the proposed low-cost robotic system for structured automation environments. Originality/value This study presents a practical, low-cost robotic manipulation platform that enables accurate command-based pick-and-place operations using a sensor-minimal closed-loop joint control strategy without reliance on vision or force sensing. The experimentally validated design offers a replicable and accessible solution for small-scale industrial automation, laboratory research and educational applications, demonstrating that reliable manipulation performance can be achieved using affordable hardware and simple control strategies.
No takes yet. Share an insight, caveat, or question.
Inkulu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: