Key points are not available for this paper at this time.
Yttria‐stabilized‐zirconia samples with fairly narrow pore size distributions give well‐defined microstructure impedance semicircles which can be characterized by a blocking factor α R , a capacitance ratio α C and a frequency ratio α F . On an α R vs . α C diagram, the regimes where either the pores or the grain boundaries are dominant are clearly separated. As expected from the reference model, the α R α F product was found proportional to porosity. The fairly continuous variations of α F from the densification to the grain growth regime revealed that voids remained present along the grain boundaries. Comparison of different results shows a remarkable constancy of the average thickness of the grain‐boundary blockers in the samples sintered at high temperature. The electrical bulk properties obey simple laws as functions of porosity, which allows us to correct the conductivity and dielectric‐constant data obtained with imperfectly densified materials.
Steil et al. (Wed,) studied this question.