Answers are grounded in this paper and cite their sources.
Bone tissue engineering urgently needs implantable scaffolds combining high mechanical integrity and patient-specific anatomical conformity. In this work, 3D printing filaments of carbon fiber/polyetheretherketone (CF/PEEK) composites were successfully fabricated. Based on fused filament fabrication (FFF) technology, the coupled effects of raster angle (15°–90°), CF content (0%, 5%, and 10%), and heat treatment (200 °C and 300 °C) on the flexural behavior of PEEK and CF/PEEK scaffolds were studied systematically. Research findings indicate that the raster angle is the key factor governing the failure mode of scaffolds. The equivalent flexural strength of PEEK scaffold with raster angle of ±45° achieves maximum value attributable to micro-strut buckling, which enables efficient stress redistribution and localized energy dissipation. The reinforcing efficacy of CF on the flexural performance governed primarily by raster angle. With the CF content of 5%, the incorporation of CF at low raster angles (≤45°) markedly improves both equivalent flexural modulus and strength, accompanied by a reduction in fracture strain. When the CF content increase to 10%, the flexural performance of the composite scaffold is compromised. A balance of equivalent flexural strength, equivalent flexural modulus, and damage tolerance could be achieved by adopting a strategy of raster angle (30°-45°), moderate CF content (about 5%). The mapping relationship between mechanical properties, raster angle and CF content is established through bivariate polynomial fitting, which enhances both predictive accuracy and process controllability.
No takes yet. Share an insight, caveat, or question.
Sheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: