Answers are grounded in this paper and cite their sources.
Carbon dioxide (CO 2 ) injection for enhanced oil recovery (EOR) and geological storage is crucial for increasing hydrocarbon production while reducing greenhouse gas emissions. However, its implementation involves complex geochemical, geomechanical, and colloidal processes that can compromise reservoir integrity through formation damage. This review examines how CO 2 injection alters reservoir properties, focusing on mineral dissolution (e.g., calcite, dolomite, feldspars), clay mobilization, geomechanical weakening, and destabilization and precipitation of asphaltenes. CO 2 -induced dissolution can enhance porosity (up to 20% in carbonates) and permeability (up to 7-fold in sandstones), but adverse effects often dominate: pore plugging by migrating fines, scale precipitation (e.g., calcite, siderite), and reduced rock strength (up to 34% decline in Young's modulus and compressive strength in shales). Asphaltene flocculation, triggered by CO 2 dissolution into crude oil, is particularly problematic as it lowers the solubility parameter of hydrocarbon phase, disrupts resin-asphaltene colloidal stability, and leads to irreversible pore blockage. Studies show that asphaltene deposition is pressure- and composition-dependent, peaking near miscibility conditions, and is exacerbated in low-permeability and unconventional reservoirs. To mitigate these risks, a multi-pronged strategy is essential: real-time monitoring (e.g., ACSAA, NMR), optimized injection protocols, and chemical inhibition. Emerging solutions like engineered nanocomposites—particularly ZnO/SiO 2 /xanthan/eucalyptus and UiO-66-NH 2 /TiO 2 /ZnO—show promise, achieving over 50% reduction in permeability damage and significant interfacial tension reduction, while serving as both asphaltene inhibitors and EOR enhancers (up to 21.41% incremental recovery). These nanomaterials operate through mechanisms such as adsorption, steric stabilization, surface passivation, and wettability alteration. It can be concluded that successful CO 2 -EOR requires integrated, reservoir-specific modeling of fluid-rock-oil interactions, prioritizing predictive geochemical simulations and tailored nanotechnology to balance oil recovery with long-term reservoir sustainability.
No takes yet. Share an insight, caveat, or question.
Gallyamova et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: