Answers are grounded in this paper and cite their sources.
This paper aims to investigate the shear strength of cross-anisotropic Toyoura sand by three-dimensional (3D) discrete-element simulation with non-spherical particles. Twenty true triaxial tests with constant mean pressure, different intermediate principal stress ratio [b = (σ 2 − σ 3 )/(σ 1 − σ 3 )] and different bedding angle δ (the angle between the bedding plane and the horizontal plane) were simulated. The results show that an increase in b induces a decrease in shear strength when δ is fixed. As the major principal stress direction changes from perpendicular to parallel with respect to the bedding plane, the shear strength decreases. The shear strength was characterised by a modified Mohr–Coulomb strength criterion by considering the influence of the material fabric. The characteristic of peak shear strength decreasing with b and δ can be well captured by the modified criterion. A 3D failure surface in φ–b–δ space was obtained from the simulated results; the combined influences of b and δ on the friction angle were investigated in detail. These varying characteristics of friction angle with b and δ can be captured by the modified strength criterion.
No takes yet. Share an insight, caveat, or question.
Lü et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: