Answers are grounded in this paper and cite their sources.
Ni-rich Li[Ni 0.85 Co 0.1 Al 0.05 ]O 2 (NCA) cathodes offer high energy density for lithium-ion batteries (LIBs), but suffer from severe interfacial instability and structural degradation during long-term cycling. In this study, the Al 2 O 3 /TiO 2 composite thin film was conformally deposited on the NCA surface using atomic layer deposition (ALD), and the coating thickness was controlled by adjusting the number of ALD cycles. The structural and chemical characteristics of the coated cathodes were systematically analyzed using X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), high-angle annular dark-field (HAADF) imaging, and X-ray photoelectron spectroscopy (XPS). The results confirm that the Al 2 O 3 /TiO 2 composite thin films are uniformly formed on the NCA cathode surface without altering the bulk layered structure. Among the investigated samples, the NCA cathode coated with a 2 nm-thick composite film exhibits an initial discharge capacity of 201.4 mAh g -1 and a capacity retention of 96% after 200 cycles at 1C, significantly outperforming the pristine NCA cathode (54% retention). These findings demonstrate that the optimized thickness of Al 2 O 3 /TiO 2 composite coating via ALD is an effective strategy for stabilizing Ni-rich NCA cathodes in high-performance LIBs.
No takes yet. Share an insight, caveat, or question.
Byeon et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: