Answers are grounded in this paper and cite their sources.
This study investigates the use of corona discharge atmospheric air plasma to activate the surface of Garolite, a cellulose-based thermoset composite, for enhanced adhesive joining with aluminum. Plasma treatment produced a rapid and sustained improvement in surface wettability, with the static water contact angle decreasing from 94° (untreated) to 56° after 30 s of exposure. ATR-FTIR spectroscopy confirmed oxidative functionalization through the formation of hydroxyl (–OH) groups and the enhancement of pre-existing carbonyl (–C = O) and ether (–C–O–C–) functionalities. These chemical changes increase surface polarity and interfacial reactivity. The single-lap shear (SLS) strength increased continuously with plasma exposure, rising from 3.6 to 12.5 MPa for Garolite/as-received aluminum joints and from 5.8 to 14.0 MPa for Garolite/etched aluminum joints. A direct comparison between the baseline configuration (untreated Garolite/as-received Al) and the optimized condition (plasma-treated Garolite/etched Al) revealed an overall strength enhancement of approximately 245%. The correlation between the weighted surface-energy parameter (ρ) and joint strength exhibited two distinct regimes, reflecting different sensitivities to surface activation. Overall, the results demonstrate that corona discharge plasma treatment effectively enhances polymer–metal hybrid bonding, as demonstrated for Garolite/aluminum joints in this study.
No takes yet. Share an insight, caveat, or question.
Tiwari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: